Mold removal and remediation in Katy, TX
Mold remediation in Katy means finding the moisture behind the mold, sealing off the area, removing what can't be cleaned and drying the rest. Texas adds two rules: once mold covers 25 contiguous square feet, the remediator needs a TDLR license, and a different licensed company has to test it and write the plan.
Your call is connected with an independent local company that handles water damage and mold work in Katy. We don't do the work, and we can't vouch for the company, so check the items below before anyone starts. About this referral line.

Signs it's this problem
- A musty smell that is strongest in one closet or room
- Gray, green or black spots on drywall near a past leak, often low on the wall or around an AC closet
- Swollen or soft baseboards, or a stain that keeps coming back after paint
- Spots on the ceiling below the attic air handler or around supply vents
Right now
- Find and stop the water that feeds it first: a drip, the AC drain line, a slow leak under a sink.
- Don't scrub or sand a large patch; it puts spores into the air of the whole house.
- If you think the AC ducts or air handler have mold, turn the system off until it's checked (EPA).
- Photograph the area and write down when you first noticed it, for your records.
How the job usually runs, day by day
| Before work | A licensed mold assessment company inspects, may sample, and writes the remediation protocol. In Texas it must be a different company from the remediator. |
|---|---|
| First day | The remediator sets up containment (plastic walls and negative air through a HEPA filter) and starts removing materials the protocol lists. |
| Drying days | Cleaning, HEPA vacuuming and drying of what stays, with moisture readings until each material is dry. |
| After | The assessor checks the area. Within 10 days the remediator owes you before-and-after photos and the certificate of mold remediation. |
Drying is checked with moisture readings each day until each material reaches its normal level. The estimator, set to AC drain line or attic air handler, shows the equipment ranges for your square footage.
Katy air right now
54°F, dew point 54°F, humidity 100% at Houston Executive Airport (Brookshire) (KTME), Nov 15, 11:35 PM.
The EPA asks for indoor humidity below 60 percent, and 30 to 50 percent where possible (EPA). Outdoor humidity is measured at a different temperature from your rooms, so use an indoor meter to check the house. Katy rainfall totals and weather now.
Katy and Texas facts for mold remediation
- 1Texas requires a mold remediation license once the contamination covers 25 contiguous square feet or more; a homeowner working on their own property below that size needs none. Texas Occupations Code ch. 1958 (mold)
- 2The company that assesses the mold and the company that removes it may not be the same on one project, and one person may not own both. Texas Occupations Code ch. 1958 (mold)
- 3Within 10 days of finishing, the remediator must give you a certificate of mold remediation and the before-and-after photos; when you sell, buyers get copies of certificates from the last five years. Texas Occupations Code ch. 1958 (mold)
- 4A Texas insurer may not base an underwriting decision on past mold damage if the house was remediated and has a certificate showing the cause was fixed. Texas Insurance Code sec. 544.303
- 5Texas's FAIR Plan, the residential insurer for people turned down by two companies, was set up in December 2002 partly because of growing mold and water damage claims. TDI: Texas FAIR Plan Association Overview (Oct. 1, 2026)
- 6On June 30, 2026 the FAIR Plan had 58,464 policies in force in Harris County and 8,470 in Fort Bend County, the counties where Katy's four ZIP codes mostly lie. TDI: Texas FAIR Plan Association Overview (Oct. 1, 2026)
- 7The Katy City rain gauge's 1991-2020 normal is 49.10 inches of rain a year; May is the wettest month at 5.12 inches. ACIS daily record and 1991-2020 normals (Katy City gauge; Sugar Land Regional for temperatures)
- 8The wettest month at the Katy City gauge since 1974 was August 2017, the month of Harvey, with 38.75 inches. ACIS daily record and 1991-2020 normals (Katy City gauge; Sugar Land Regional for temperatures)
- 9Flood insurance claims in Katy's four ZIP codes peaked with 2017 losses: 2,025 NFIP claims and $267,048,417 paid. OpenFEMA NFIP Redacted Claims v3
How insurance usually treats it
The Texas Department of Insurance says mold that grows on an item damaged by a covered water loss is covered, but most home policies don't cover mold from gradual leaks or seepage, and most don't include mold cleanup and testing once the damaged item is gone. Some insurers sell an add-on for cleanup after a covered loss; your declarations page shows whether you have one.
Before the company starts
- Mold work: a TDLR license. Mold covering 25 contiguous square feet or more needs a Texas mold remediation license, and the company that tests the mold may not be the one that removes it. Look the company up on TDLR's license search.
- Plumbing or AC repairs: a state license. Fixing the leaking pipe takes a licensed plumber (Texas State Board of Plumbing Examiners); repairing the AC takes a TDLR air conditioning contractor license. Drying the house is a separate job.
- Proof of insurance. Ask for a current certificate of general liability insurance before anyone carries equipment into the house, and check the dates on it.
- A written estimate first. Get the scope in writing, line by line, before work starts. Don't sign anything with blank spaces, and don't pay the whole amount up front.
- Your deductible is yours to pay. Texas law requires the insured to pay the deductible. A company that offers to cover or rebate it is offering something Texas law forbids.
Texas requires a TDLR mold remediation license once the mold covers 25 contiguous square feet or more, and the company that tests and writes the plan may not be the one that removes the mold (Texas Occupations Code sections 1958.102 and 1958.155). After the work, the remediator owes you a certificate of mold remediation within 10 days (section 1958.154). TDLR license search.
Related problems in Katy homes
- AC leak water damage in Katy
Overflow from an attic air handler or a hall closet unit.
- Slab leak water damage in Katy
Water rising through flooring from a line under the foundation.
- Flood and storm water in Katy
Rising water from streets, creeks and reservoir pools, and storm rain through openings.
Local data: Katy's humidity and rain right now. Service area: Katy ZIP codes 77449, 77450, 77493, 77494.
Questions about mold remediation in Katy
Do I need a licensed company to remove mold in Katy?
For mold covering 25 contiguous square feet or more, yes: Texas requires a TDLR mold remediation license, and a separate licensed assessor writes the plan. Below that size, anyone may remediate. You can look a company up on TDLR's license search before it starts.
Why can't the same company test and remove the mold?
Texas Occupations Code section 1958.155 bars one license holder from doing both on the same project, so the company that judges how much needs removing doesn't profit from removing it.
Can AC ducts spread mold in a Katy house?
They can carry spores from a moldy air handler or duct to other rooms. The EPA says not to run an HVAC system you think has mold in it until it has been checked.
How soon after a leak can mold start?
The EPA's guidance is to dry wet materials within 24 to 48 hours to keep mold from growing. Past that window, assume something will grow.
Water still coming in?
Call (346) 500-6571